Unfortunately, USA2Net is unable to offer automatic setup for Apple computers, however, the following sections will demonstrate how to configure your Apple computer for use with our services.

Select your computer type:

[MAC Configuration]            [iMAC Configuration]

The  following screen shots will show you how to set up PPP  for the Macintosh with OS 8. First, click on your Apple  menu, then Control Panels, and then click on PPP.

You will see the following:

Click on Options, then click on  the Redialing tab and you will see this:

The information here is strictly optional, leaving it as it is will be fine. Click on the Connection tab and you will see this screen:

Place check marks in the boxes just  like you see above and then click on the Protocol tab and you will see this:

Again, make your settings look exactly like what you  see above and then click on OK . At this  point make sure your username and password are entered correctly and then click on Connect. PPP will connect you to USA2net!

Top